|
|
|
|
|
Products mentioned in this Article
--None--
|
|
|
|
|
|
|
|
|
M10 Tank Destroyer Platoon (UBX31)
|
M10 Tank Destroyer Platoon (UBX31)
includes four M10 Tank Destroyers (with optional Duckbills & Top Armour upgrades) with
crew and plastic parts sprue, two Tank Stowage sprues, one Decal sheet
& eight
Rare-earth magnets.
The M10 3” GMC (gun motor carriage) tank destroyer was developed to handle medium and heavy German tanks. It was the first destroyer to incorporate a turret, which housed the 3”
anti-tank gun, the best in the US arsenal at the time.
This box set is no longer on sale – instead check out the plastic Tank Destroyer Platoon (UBX49)
|
The Battle of the Bulge
In December 1944 the German forces were supposed to be on the back foot, so their desperate push in the Ardennes took the Allies by surprise. Desperate defence by the American and British Commonwealth forces gradually turned to counterattack as they fought to erase the 'Bulge'.
Learn more about The Battle of the Bulge here...
|
|
|
The M10 soldiered on from the North African campaign to the end of the war. During that time crews made some field modifications to improve some of the vehicle’s major weaknesses, such as the open fighting compartment and the thin frontal armour, with overhead protection and improvised armour using sandbags.
The M10s typically served infantry divisions, offering their guns to blast German pillboxes when not otherwise engaged with enemy tanks.
Designed by Evan Allen
Painted by Shelby Taylor
|
The M10 Tank Destroyer in Flames Of War |
|
|
|
Armour
|
|
|
Name
|
Mobility
|
Front
|
Side
|
Top
|
Equipment and Notes
|
Weapon
|
Range
|
ROF
|
Anti-tank
|
Firepower
|
|
M10 3in GMC
|
Standard Tank
|
4
|
2
|
0
|
.50 cal AA MG. |
M7 3in gun (late)
|
32"/80cm
|
2
|
13
|
3+
|
Slow traverse.
|
|
Slow Traverse
Most tanks were either fitted with power traverse or had turrets that
were light enough to be quickly swung by hand. Some designs suffered
from heavy turrets lacking power traverse.
Tanks with slow traverse add +1 to the score required to hit when
shooting any turret-mounted weapon except an AA MG at targets that are
entirely behind a line drawn across the front of the tank’s turret
before they rotate their turret to face the target. |
The M10 Tank Destroyer Platoon Stalk Their Prey
|
The Contents of the M10 Tank Destroyer Platoon Box Set |
Contact the customer service team at [email protected] if you have any issues with any of the components. |
Description of Components |
a. 4x Plastic Sherman sprue.
b. 4x Resin M10 turrets.
c. 4x Resin M10 hulls.
d. 4x Crew figure variant A.
e. 4x Crew figure variant B.
f. 4x Crew figure variant C. |
g. 4x 3in gun barrels.
h. 8x Rare earth magents.
i. 4x Duck-bill turret counterweight.
j. 4x Standard turret counterweight.
k. 4x Improvised roof armour. |
The Plastic Sherman Sprue
The parts of the plastic Sherman sprue that are used when
assembling the M10 tank destroyer are highlighted in green.
Right: The highlighted parts of the plastic Sherman sprue used in the construction of the M10 tank destroyer. |
|
Battlefront TV
Basic Decal Guide
Blake demonstrates the basics of applying decals.
Below: The decal sheet shown at 150%.
|
|
Assembling The M10 Tank Destroyer
|
Step 1. Begin assemble by attaching the tracks to the hull of the M10.
Note: Each track has a number of lugs on the back that correspond with the recesses in the hull to aid in the
correct alignment of the tracks.
|
Below: The correct alignment for the left-hand side track. |
Below: The correct alignment for the right-hand side track. |
|
|
Below: The left-hand side track attached to the M10 hull. |
Below: The right-hand side track attached to the M10 hull. |
|
|
Step 2. Next, attach the M7 3in gun barrel to the recess on the front of the turret. |
Step 3. Inside the turret there
are three round platforms to place the crew figures. On these three
platforms arrange one figure of each crew variant (A, B, & C) inside
the turret. |
|
|
|
Turret Options
|
Due to the size and weight of the M7 3in gun that armed the M10, the rear of the turret required a counterweight. The two triangular counterweights attached to the turret provided the 1600kg necessary to balance the turret. Later production runs of the M10 were provided with a Duck-bill counterweight and an increase in size of the fighting compartment.
Due to its open turret design, the M10 was vulnerable to small arms fire when called upon to provide infantry support. To remedy this problem, an improvised armoured roof was created to help keep the crew safe from incoming fire. |
Below: The standard counterweight. |
Below: The Duck-bill counterweight.
|
Below: The Duck-bill counterweight and improvised armoured roof.
|
|
|
|
Step 4. Then attach the .50cal AA MG to the rear of the turret using the recess in provided in the counterweight. |
Step 5. With the .50cal AA Mg in place, the M10 tank destroyer is ready for painting. |
|
|
|
Last Updated On Tuesday, August 30, 2016 by James at Battlefront
|
|
|