Step 1. Begin assembly of the Brummbär by attaching left-side tracks to the hull.	Step 2. Next attach the right-side tracks to the hull.	Below: The tracks in place.

Step 3. Next, attach gun barrel to the upper hull section.	Below: The plastic Schürzen sprue with the bracket peices nessesary for Step 4.

Step 4. Place the bracket peices into the slots on the hull on the right hand side.

Step 5. Next place the rail on the bracket peices. The 'V's point up to help with orientation.	Step 6. Now attach the Schürzen plates to the rail. The rail bend should align with the down angle of the Schürzen plate.

Step 7. Place the bracket peices into the slots on the hull on the right hand side.

Step 8. Next place the rail on the bracket peices. The 'V's point up to help with orientation.	Step 9. Now attach the Schürzen plates to the rail. The rail bend should align with the down angle of the Schürzen plate.

Step 10a. Now glue the comanders hatch in the circular slot.	10b. Alternatively if you want to place a comander, cut the hatch in half and glue the two peices to the hull. Then place the comander inside the open hatch.

Below: A fully assembled Brummbär.