Step 1. First, attach the upper hull to the lower hull.	Step 2. Next, the front transmission cover can be attached.

Step 3. The hull can be closed up by attaching the rear plate.	Step 4. Attach the tracks to the lower hull. These are keyed to help get the orientation correct.	Step 5. Finally, the forward machine gun turret can be glued into place.

The completed Kangaroo, now ready to head to the painting booth!

The Ram Tank can be assembled using the hull of the Kangaroo. To build the Ram, follow the steps above to build the hull, then continue below.

Step 1. Taking the assembled Kangaroo, glue the turret mounting plate in place. This is keyed to help with alignment.	Step 2. Moving on to the turret, attach the turret top to the turret bottom.

Step 3. The mantlet can be attached to the front of the turret next.	Step 4. The gun can be inserted into the mantlet, using the key to get the orientation correct.	Step 5. Finally, insert your choice of commander's hatch, taking note of the direction.

The turret fully assembled.	To attach the turret to the hull, you can insert the included turret peg into the recess in the bottom of the turret.

Adding Rare Earth Magnets Alternatively, you may choose to glue rare earth magnets into the recess in the hull and to the bottom of the turret. Magnets are a quick and secure way of fixing your turrets to the hulls, as an alternative to the included plastic peg. Rare Earth Magnets (XX105) are available through the online store here...

The completed Ram, now ready to head to the painting booth!